Product Description
PAM8610 2x15W Digital Two-channel Stereo Power Amplifier Board
Specification:
Working mode: Class D (PWM modulation type)
Chip selection: PAM8610
Power supply range: DC6V-15V (Nature Protection) (Recommended power: DC 12V2A)
Dimensions: 25 * 31 * 2.5mm
Channel Type: Dual Channel
Output power: 10W * 2 (8R load) / 15W * 2 (4R load) (Recommended speaker: 10-30W)
Frequency response: 20HZ-15KHZ
Quiescent current: 20mA (DC12V)
SNR: 90%
Input impedance: 20K
Output impedance: 4-8R
Harmonic Distortion: <0.1%
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
-15%PCBWay Single-Channel Relay Module with Delayed Power-off, Triggered Delay, and Cyclical Timing Circuit Switch$1.69 or 200 BeansRedeem Now
-
-
Four Way Holder V3 Development Board(Compatible with Raspberry Pi/STM32)$8.99 or 1080 BeansRedeem Now
-
-50%1 Channel Relay Module 5V with optocoupler Support High and Low Level Trigger$0.99 or 120 BeansRedeem Now
-
Relay Module Interface Boards for Arduino Low Level Trigger 5V 2 Channels$2.00 or 200 BeansRedeem Now
-
-
LM2596S DC-DC 3A Buck Adjustable Step-down Power Supply Converter Module$0.99 or 120 BeansRedeem Now
-
-
-
-
-
Step-Down & Step-Up Converter DC-DC 1.8V-5V 3V 3.7V to 3.3V Power Module$1.00 or 100 BeansRedeem Now
-
USB isolator/USB to USB isolator digital signal audio power isolator ADuM3160$9.99 or 1200 BeansRedeem Now
-
-
-
Dual 18650 Battery Holder V3 Development Board(Compatible with Raspberry Pi/STM32)$4.99 or 600 BeansRedeem Now